Perkins — Perkins Sabre Marine Engines Installation Manual

Chapter 11 TPD1317e Page 68 Model M300Ti Model M265Ti Sea cock Full flow 25.4 mm (1 inch) Strainer Raw water strainer must be included in suction side of the circuit Maximum sea water 38oC (100oF) temperature Sea water flow 123 l/min (27 galls/min) Fuel System Recommended fuel BS2569 Class A ASTM D975 Number 2D specifications Fuel injection pump Bosch MW in-line with boost control and electric stop (energised to stop) Fuel lift pump Bosch plunger type Fuel feed pressure (static) 0.3 to 0.6 bar (5 to 8 psi) Governor type Mechanical Pipe size:

• Supply - outside diameter 10mm (0.394”) • Supply - bore 8.4mm (0.331”) • Return - outside diameter 10mm (0.394”) • Return - bore 8.4mm (0.331”) Maximum lift pump lift 1.8 m (6ft) to bottom of tank suction pipe Maximum fuel lift pump 127 mm (5 inches) Hg depression at inlet Fuel consumption at full 56.4 l/hr (12.4galls/hr) 50 l/hr (11galls/hr) power Air Intake Combustion airflow 14.8m3 /min (524ft3/min) 13.8m3 /min (488ft3/min) Maximum engine compartment 60oC air temperature Maximum air temperature at 52oC engine inlet Ventilation - maximum engine 125 mm WG (5” WG) room depression Suggested ventilation airflow 30m3 /min (1050ft3/min) 28m3 /min (1000ft3/min) including combustion air