Chapter 11 TPD1317e 11.4 M115T, and M92 Engines Page 76 Model M115T Model M92 Basic Technical Data Rated power 80 kW (107 bhp) 63.5 kW (85 bhp) Rated engine speed 2400 rev/min Number of cylinders 4 Cylinder arrangement Vertical in-line Cycle 4 stroke lnduction system Turbocharged Naturally aspirated Combustion system Fastram direct injection Bore 100 mm (3.937”) 103.0 mm (4.055 in) Stroke 127 mm (5.00”) 127 mm (5.00”) Compression ratio 17.25:1 18.5:1 Cubic capacity 3.99 litres (243 in3) 4.23 litres (258 in3) Valves per cylinder 2 Direction of rotation Anti-clockwise viewed on flywheel Firing order 1, 3, 4, 2 Total weight (wet) 422.6 kg (933 lbs) 417.8 kg (921 lbs) engine only including starter and alternator Cooling System The coolant shown below is mandatory for use in all climates to ensure that adequate levels of corrosion inhibitor are present.
It will give frost protection to -37oC. Coolant 50% inhibited ethylene glycol or 50% inhibited propylene glycol with 50% fresh clean water Fresh water flow 202 litre/min (44.4 gall/min) at 2400 rev/min Coolant pump speed and method of drive. Gear driven System capacity 19 litres (4.18 gallons) Pressure cap setting 50 kPa (7 psi) Protection switch setting 96oC Sea water pump type Jabsco gear driven model Jabsco gear driven models 25.4 mm (1”) full cam. 25.4 mm (1”) 2/3 cam