Perkins — Perkins Sabre Marine Engines Installation Manual

TPD1317e Chapter 11 Page 81 Model M92B Exhaust Exhaust gas flow 12.3 m3/min (434 ft3/min). Maximum restriction measured within(305 mm) 12” of turbocharger outlet. 15 kPa (4.43” Hg, 112 mm) Recommended pipe bore (wet exhaust). 76 mm (3”) Minimum rise from sea water level to exhaust outlet centreline. 203 mm (8.0”) Lubricating System Recommended lubricating oil. AP1 CG4/CH4, ACEA E3/E5 Sump capacity maximum 7 litres (12.3 pints) Maximum installation angle plus planing angle for continuous operation. 20o nose up Oil pressure, in operating speed range (steady state). 3.0 to 3.7 bar (43.5 to 54 Ibf/in2) Low oil pressure switch setting.

0.8 bar (12 Ibf/in2) Electrical System Alternator (insulated) Prestolite A128E 55A (24V) or 90A (12V). Starter type (insulated) Prestolite S115 - 12 volt and 24 volt Number of teeth in flywheel 126 Number of teeth on starter 10 Cold Start Limits Minimum cold start temperature (without aid). -10oC Batteries for minimum 12 volt system - 1 off 12 volt 520 amp to BS3911 cold start 24 volt system - 2 off 12 volt 440 amp to BS3911