Perkins — Perkins Sabre Marine Engines Installation Manual

Chapter 11 TPD1317e Page 80 Model M92B Sea water strainer A strainer must be included in the suction side of the circuit Maximum sea water temperature. 38oC (100oF) Sea water flow 98 l/min (21.5 UK galls/min) Fuel System Recommended fuel specifications. BS2869 Class A2 ASTM D 975 Number 2D. Fuel injection pump Bosch EPVE Governor type Mechanical Pipe size: • Supply - Outside diameter 8 mm (0.313”) • Supply - Bore 6.5 mm (0.26”) • Return - Outside diameter 6.35 mm (0.25”) • Return - Bore 4.93 mm (0.194”) Maximum lift pump lift 2m (78in) to bottom of tank suction pipe. Maximum fuel lift pump depression at inlet. 127 mm (5”) Hg Fuel consumption at full power.

17.62 l/hr (3.88 galls/hr) Air Intake Combustion airflow 6.64 m3/min (235 ft3/min) 4.6 m3/min (162 ft3/min) Maximum engine compartment air temperature. 60oC (140oF) Maximum air temperature at engine inlet. 52oC (125oF) Ventilation - maximum engine room depression. 125mm WG (5”WG) Suggested ventilation airflow including combustion air. 8.4 m3/min (296 ft3/min) Minimum cross section of air duct (per engine). 139 cm2 (21.5 sq ins) temperate climates 277 cm2 (42.9 sq ins) for hot climates