Perkins — Perkins Sabre Marine Engines Installation Manual

TPD1317e Chapter 11 11.5 M92B Engines Page 79 Model M92B Basic Technical Data Rated power 64 kW (85.6 bhp) Rated engine speed 2400 rev/min Number of cylinders 4 Cylinder arrangement Vertical in-line Cycle 4 stroke lnduction system Naturally aspirated Combustion system Direct injection Bore 105.0 mm (4.13 in) Stroke 127 mm (5.00”) Compression ratio 18.23:1 Cubic capacity 4.4 litres (269 in3) Valves per cylinder 2 Direction of rotation Anti-clockwise viewed on flywheel Firing order 1, 3, 4, 2 Total weight (wet) 423 kg (933 lbs) engine only including starter and alternator Cooling System The coolant shown below is mandatory for use in all climates to ensure that adequate levels of corrosion inhibitor are present.

It will give frost protection to -37oC. Coolant Sabre extended life coolant 50/50 mix. Fresh water flow 193 litre/min (42.5 UK gall/min) at 2400 rev/min Coolant pump speed and method of drive. Gear driven System capacity 19 litres (4.18 gallons) Pressure cap setting 50 kPa (7 psi) Protection switch setting 96oC Sea water pump type Jabsco gear driven model, 25.4 mm (1”) full cam.