3.2 Explanation of components Operation 15. Hold switch To fix the speed range when traveling in automatic transmission, press switch (15) at the side of the lift arm control lever knob. The transmission will be fixed in the speed range displayed on shift indicator (A) on the machine monitor and shift hold pilot lamp (B) will light up. When the switch is pressed again, the display goes out. Use this function to select the desired speed range when travel- ing up or down hills or when carrying out operations such as grading. GK038030 REMARK When canceling the shift hold, operate the directional lever or gearshift lever or operate the transmission shift mode selector switch to MANUAL.
It is also possible to cancel the hold shift by turning the starting switch OFF. B A GK038031 16. Front wiper switch a When rotary switch (A) of this switch (16) is turned, the front wiper will move. Display window b If push button (B) is pressed, washer liquid will be sprayed out onto the front glass while the button is being pressed. c It is possible to check the position of the switch in display win- dow (G). Push button B d Rotary switch A Position (a): (OFF) Stop GK032133 Position (b): (INT) Intermittent wiper Position (c): Low-speed wiper Position (d): High-speed wiper 3-50 WA470-6H – VEAM946100