Operation 3.2 Explanation of components 24. Directional selector switch This switch (24) is used to switch the direction of travel of the machine between forward and reverse. F Position: FORWARD N Position: Neutral R Position: REVERSE Before operating this switch, check that the condition is as fol- lows. GK043139 ! Directional lever is at N ! Directional selector switch actuation switch is at ON If the condition is not as above, the switch will not work. For details, see "Changingdirection (3-118)". 25. Directional selector switch actuation switch When this switch (25) is turned on, the directional selector switch on the side of the lift arm control lever is actuated. a Position (a):
ON The directional selector switch is actuated. The directional selector pilot lamp on the machine monitor lights up. b Position (b): OFF The directional selector switch is turned off. GK038037 26. Torque converter lock-up switch (Option) a This switch (26) is the control switch for the torque converter lock-up function. Position (a): ON The pilot lamp inside the switch lights up and the lock-up is actu- ated according to the travel speed. While the lock-up is engaged, the lock-up pilot lamp on the machine monitor lights up. b GK038038 Position (b): OFF The lock-up does not function. For details, see "Handling torque converter lock-up (6-3)" WA470-6H – VEAM946100 3-55