Operation 3.2 Explanation of components 1. Gearshift lever This lever (1) changes the speed range of the transmission. Manual shift This machine has a 4-FORWARD, 4-REVERSE speed trans- mission. Place the gearshift lever in a suitable position to obtain the desired speed range. a ! 1st and 2nd speeds are used for working. b ! 3rd and 4th speeds are used for traveling. c d GK043142 However, when the gearshift lever stopper is being used, it is impossible to shift to 3rd or 4th. Disengage the gearshift lever stopper before trying to shift gear. Position (a): 1st Position (b): 2nd Position (c): 3rd Position (d): 4th REMARK The lever length can be set to 3 levels (positions (A), (B), and (C)).
For adjustment, consult your KOMATSU distributor. The lever is installed to position (B) when delivered. A B C GK047007 Automatic shift Automatic gear shifting can be carried out in the 2nd through 4th speed range of the four forward and reverse speeds depending on the travel conditions. Position (a): 1st a Position (b): 2nd b c d Position (c): 3rd GK043142 Position (d): 4th WA470-6H – VEAM946100 3-57