3.2 Explanation of components Operation The range of speeds during automatic gear shifting is deter- mined by the position of the gearshift lever as shown in the chart on the right. Gear shift lever positions Speed range 2nd 2nd 3rd 2nd 3rd 4th 2nd 3rd 4th REMARK The 1st position for the gearshift lever fixes the transmission in 1st. There is no automatic shifting of the transmission. When shifting down from 2nd to 1st, press the kick-down switch on the lift arm control lever.
If the transmission is in auto-shift and the travel speed is below 10.5 km/h (6.5 MPH) in any speed range when traveling in either forward or in reverse, the kick-down switch is actuated and makes it possible to shift down to 1st. This makes it easy to carry out load and carry operations. Even if the travel speed is more than 10.5 km/h (6.5 MPH), this switch can be used to shift the transmission down. Each time the kick-down switch is pressed, the speed range will shift down one range at a time (when in 4th: F4 -> F3 -> F2; when in 3rd: F3 -> F2). If the torque converter is locked up, the lock-up is cancelled.
GK038030 To set to the desired speed range when traveling uphill or down- hill, or when carrying out grading, do as follows. ! When fixing the speed range Press the HOLD switch on the lift arm control lever. The speed range is fixed at the speed range displayed on the transmission indicator on the main monitor. ! When shifting up or down from set speed range Shift gear with the gearshift lever. GK038030 REMARK When the transmission has been shifted down from 2nd to 1st with the kickdown switch, it will shift up from 1st to 2nd when the travel speed increases. 3-58 WA470-6H – VEAM946100