Komatsu — 3.2.3 Control levers, pedals

Operation 3.2 Explanation of components 5. Bucket control lever This lever (5) operates the bucket. c Position (a): TILT When the bucket control lever is pulled further from the TILT position, the lever is stopped in this position until the bucket reaches the preset position of the positioner, and the lever is returned to the HOLD position. a b Position (b): HOLD The bucket is kept in the same position. GK038039 Position (c): DUMP Tilt Dump GK032144 6. Lift arm control lever c d This lever (6) is used to operate the lift arm. b NOTE Do not use the FLOAT position when lowering the bucket. Use the FLOAT position when leveling, see "Leveling operation (3-134)". a Position (a):

RAISE When the lift arm control lever is pulled further from the RAISE position, the lever is stopped in this position until the lift arm reaches the preset position of the kickout, and the lever is returned to the HOLD position. GK038040 Raise Position (b): HOLD The lift arm is kept in the same position. Position (c): LOWER Position (d): FLOAT The lift arm moves freely under external force. Lower GK032142 REMARK If the engine is stopped or the work equipment lock lever is at the LOCK position, the lever does not stop at the detent position. WA470-6H – VEAM946100 3-61