Komatsu — 3.2.3 Control levers, pedals

3.2 Explanation of components Operation 7. Brake pedal ! When traveling downhill, always use the right brake pedal, and use the braking force of the engine together with the brake. ! Do not use the brake pedal excessively. If the brake is used too frequently, the brake will overheat. If this happens, the brakes will not work and may lead to a serious accident. ! Do not put your foot on the brake pedal unless necessary. These pedals (7) operate the brakes. Right and left brake pedal The right brake pedal operates the wheel brakes. Use the right brake pedal for normal braking operations. The left brake pedal operates the wheel brakes.

When the transmission cut-off switch is at the ON position, the brakes are applied, and the transmission is returned to Neutral at the same time. GK038041 When the transmission cut-off switch is at the OFF position, the brakes are applied, but the transmission is not returned to Neu- tral. REMARK When using the brake and accelerator together to reduce the machine travel speed or to stop the machine while carrying out operations, set the transmission cut-off switch to the ON position and use the brake pedal. 8. Accelerator pedal This pedal (8) controls the engine speed and output. The engine speed can be freely controlled between low idling and full speed.

GK038041 3-62 WA470-6H – VEAM946100 WARNING WARNING