Komatsu — 3.2.8 Grease pump

3.2 Explanation of components Operation 3.2.7 Towing pin 1. Insert towing pin (1) into hole (2) in the counterweight. 1 2 GK038042 2. Use linch pin (3) to set so that the towing pin does not come out. Reverse this operation to remove the pin. 3 GK038043 3.2.8 Grease pump The grease pump is stored inside the toolbox on the front left of the rear frame. After using the pump, wipe off all the grease from the outside of the pump and stow the pump in the toolbox. 1. Turn the grease pump so that lever (2) of grease pump (1) faces the outside of the machine. 2. Using the bottom of grease pump (1) as the fulcrum, tilt grease pump (1) towards you and remove it from holder (3). 3.

Lift grease pump (1) up and remove it from the grease box. GK047009 4. When stowing the grease pump away, carry out the above Steps 1 - 3 in the opposite order. 3 2 1 GK047010 3-66 WA470-6H – VEAM946100