Komatsu — 3.2.10 Cab door open lock

Operation 3.2 Explanation of components 3.2.9 Cab door ! Always check that the cab door is locked, both when it is open and when it is closed. ! Always stop the machine on level ground before opening or closing the door. ! Avoid opening or closing the door on a slope. There is dan- ger that the operating effort may suddenly change. ! When opening or closing the door, always use door handle and knob. ! Be careful not to get your hands caught by the front pillar or center pillar. GK038047 ! When there is any person inside the cab, always call out a warning before opening or closing the door.

3.2.10 Cab door open lock When getting in or out of the operator's compartment, or when operating with the door open, use this lock to hold the door in position. 1. Push the door against catch (1) to lock it in position. 2. When attaching the door in position, lock it firmly to the catch. 3. When getting on or off the machine, hold the handrail on the inside. 1 GK038045 4. When closing the door from the operator's seat, push knob (2) to release the catcher. 2 5. When closing the door after getting off the machine, pull knob (3) down to release the catcher. 3 GK038046 WA470-6H – VEAM946100 3-67 CAUTION CAUTION