Operation 3.2 Explanation of components Heating operation 1. Press main power switch (1) of the air conditioner to turn the power ON. A 2 2. Press fan switch (2) and set the air flow to “Hi“. 4 3. Press temperature control switch (3) and set the display monitor to HOT (A). 1 4. Press RECIRC/FRESH selector switch (4) to select FRESH. 3 5. When the temperature inside the cab goes up, use the tem- perature control switch and the fan switch to set to the desired temperature. GK038066 REMARK Heating is carried out using the engine cooling water, so it can be carried out when the cooling water temperature is high. Drying-heating and demisting operation 1.
Press main power switch (1) of the air conditioner to turn the power ON. 2 4 2. Press fan switch (2) and set the air flow to the desired set- ting. 5 3. Press temperature control switch (3) and set to the desired temperature. 1 GK038066 3 4. Press RECIRC/FRESH selector switch (4) to select FRESH. 5. Press air conditioner switch (5) to turn the air conditioner ON. REMARK When the outside temperature is below 0°C, the air conditioner (compressor) may not operat WA470-6H – VEAM946100 3-77