Komatsu — Check before starting

Operation 3.3 Operation Check before starting If the machine is at an angle, reposition it level before checking. Carry out the following inspections and cleanings every day before starting the engine for the dayґs work. Check monitor panel 1. Turn starting switch to the ON position (B). A B C GK038021 2. Check that all the monitors, gauges, and the central warning lamp light up for approx. 2 seconds and the alarm buzzer sounds for approx. 2 sec. If the lamps do not light up, there is probably a failure or dis- connection. Contact your KOMATSU distributor for inspec- tion. GK038005 WA470-6H – VEAM946100 3-91