Komatsu — Adjust lever stand

Operation 3.3 Operation Adjust lever stand ! When adjusting the lever stand, check that the work equip- ment lock lever is securely at the LOCK position. ! If it is not at the LOCK position, and the work equipment con- trol levers are touched by accident when adjusting the lever stand, the work equipment may suddenly move and cause serious personal injury. Adjust height and angle of wrist rest The height and angle of wrist rest (1) can be adjusted by loosen lock lever (2). 1 2 Height adjustment amount: 30 mm Angle adjustment amount: 44 degrees REMARK Set lock lever (2) to the FREE position. The lock lever is loos- ened.

Hold the armrest at the desired position and move the lock lever to the LOCK position to secure the armrest in position. Lock Free Free GK038075 Adjust lever stand forward and backward Pull lever (1) up with your left hand, grip wrist rest (3) with your right hand and move it to the front or rear, then release lever (1). Amount of adjustment: 180 mm 3 GK038076 1 WA470-6H – VEAM946100 3-101 WARNING WARNING