Operation 3.3 Operation Operations and checks before starting engine Before starting the engine, check that the work equipment lock lever (3) is securely at the LOCK position. If the work equipment control lever is touched by accident when starting the engine, the work equipment may move unexpectedly and cause serious damage or personal injury. 1 2 3 4 GK038083 1. Check that parking brake switch (1) is at the ON position (A). ON OFF GK038008 2. Check that directional lever (2) is at the N position. If directional lever (2) is not set to the N position, the engine will not start. REMARK If the directional lever is not at the N position, the alarm buzzer will emit short sounds. N GK043163 3.
Check that the bucket is completely lowered to the ground. If it is not completely lowered, lower the bucket to the ground as follows. " Check that the work equipment control lever is at the HOLD position, then set the safety lock lever to the FREE position. " Operate the work equipment control lever to lower the bucket to the ground. " Check that the work equipment control lever is at the HOLD position, then set the safety lock lever to the LOCK position. GK032064 WA470-6H – VEAM946100 3-103 WARNING WARNING