Operation 3.3 Operation 3.3.2 Starting engine Normal starting ! Start the engine only after sitting down in the operator's seat. ! Do not attempt to start the engine by short-circuiting the engine starting circuit. Such an act may cause serious bodily injury or fire. ! Check that there are no persons or obstacles in the sur- rounding area, then sound the horn and start the engine. ! Exhaust gas is toxic. When starting the engine in confined spaces, be particularly careful to ensure good ventilation. GK038080 1 NOTE ! Do not accelerate the engine suddenly before completing the warming-up operation. ! Do not start the engine with the accelerator pedal fully depressed.
There is danger that the engine parts may be damaged. ! Do not keep the starting motor rotating continuously for more than 20 seconds. If the engine does not start, wait for at least 2 minutes before trying to start the engine again. Avoid the sudden acceleration of the engine until it is warmed up. GK038005 2 This machine is equipped with an engine automatic preheating device that functions to start the engine preheating automati- cally. If the ambient temperature is low, the preheating monitor will light up when the key in starting switch (1) is turned to the ON position to inform the operator that preheating has been started automatically. 1.
Turn the key in starting switch (1) to ON position (B). A B If the ambient temperature is low, the preheating pilot lamp (2) lights up and automatic preheating is carried out. Keep the key in starting switch (1) at the ON position until the pre- heating pilot lamp (2) goes out. C GK038021 WA470-6H – VEAM946100 3-105 WARNING WARNING