Komatsu — Starting in cold weather

3.3 Operation Operation (X): Preheating time (sec.) (Y): Start-up temperature (°C) (X) (Y) GK047018 2. When preheating pilot lamp (2) goes out, turn the key in starting switch (1) to the START position (C). A B Keep the key in starting switch (1) at the START position (C) to keep the starting motor running until the engine starts. 3. The starting motor will continue to turn and the engine will start. C REMARK In low temperatures, to ensure lubrication of the engine and to improve the durability, no fuel is supplied to the engine for 3 sec- onds after the key in starting switch (1) is turned to the START position (C), so the engine will not start during this time.

Therefore, keep the key in starting switch (1) at the START posi- tion (C) to keep the starting motor running until the engine starts. GK038021 4. Method of starting engine in temperatures of approx. -20°C. " Keep the engine starting motor running for the max. 20 seconds, holding the key of engine starting switch (1) in the START position (C), until the engine starts up. " If the engine fails to start up even after running the engine starting motor for about 20 seconds, stop the engine starting motor once (release the engine starting switch (1) key), and try the same process again after a pause for a minute or so.

" If the engine still fails to start up after the second attempt, try the same process for the third time after a pause for a minute or so. 5. When the engine has started up and the engine speed rises, release the key of engine starting switch (1). A B The key will automatically return to the ON position (B). C GK038021 3-108 WA470-6H – VEAM946100