Komatsu — Preparations for moving the machine

3.3 Operation Operation 3.3.6 Moving the machine (directional, speed), stopping the machine ! Always remove the frame lock bar for travel operations. If it is not removed, the steering wheel cannot be used for steer- ing, and this may lead to serious damage or injury. ! When moving the machine, check that the area around the machine is safe, then sound the horn before starting. ! Do not allow people to get near the machine. ! Clear the machine's travel path of any obstacle. ! Pay particular attention to the blind spot at the rear of the machine when traveling in reverse. !

When starting the machine off up a slope, set the transmis- sion cut-off switch to the OFF position, depress the left brake pedal. Then depress the accelerator pedal and gradually release the brake pedal to start the machine off. This makes it possible to prevent the machine from rolling back. Preparations for moving the machine 1. Check that warning pilot lamp (1) is not lighted up. 1 GK038005 2 3 6 8 7 9 4 GK038083 5 3-114 WA470-6H – VEAM946100 WARNING WARNING