Operation 3.3 Operation 3.3.4 Stopping engine NOTE If the engine is abruptly stopped before it has cooled down, engine life may be greatly shortened. Consequently, do not abruptly stop the engine except for an emergency. In particular, if the engine has overheated, do not abruptly stop it but run it at medium speed to allow it to cool gradually, then stop it. GK038080 1 1. Run the engine at low idling for about 5 minutes to cool down gradually. A B 2. Turn the key of starting switch (1) to the OFF position (A) to stop the engine. 3. Remove the key from starting switch (1). C GK038021 3.3.5 Check after stopping engine 1.
Walk around the machine and check the work equipment, bodywork, and undercarriage, and check also for oil and water leakage. 2. Fill the fuel tank. 3. Check the engine compartment for paper and debris. Clean out any paper and debris to avoid a fire hazard. 4. Remove any mud affixed to the undercarriage. WA470-6H – VEAM946100 3-113