Komatsu — Changing gear speed

Operation 3.3 Operation Changing gear speed ! When traveling at high speed, do not shift gear suddenly. Use the brake to reduce the travel speed before shifting gear. 3 ! Do not switch between FORWARD and REVERSE when traveling at high speed. ! When switching between FORWARD and REVERSE, depress the brake to reduce the travel speed sufficiently, then change the direction of travel. Max.speed for changing direction: 12 km/h. GK038080 2 1 Shift gear as follows. Move the gearshift lever (1) to the desired position to shift gear. When carrying out digging or loading operations, the operation is carried out in 1st or 2nd, so use the gearshift lever stopper (2). Position (a): 1st a Position (b):

2nd b Position (c): 3rd c d 2 GK043142 Position (d): 4th For details, see "Preparations for moving the machine (3-114)". REMARK If the gearshift lever is operated slowly or is stopped between gear positions, the central warning lamp may light up and the alarm buzzer may sound. In this case, there is no failure, but try to operate the gearshift lever so that the gearshifting is com- pleted within 2 seconds. This machine is equipped with kickdown switch (3). When travel- ing in 2nd, if kickdown switch (3) is pressed, the transmission shifts down to 1st. For operations carried out in 1st and 2nd, such as digging and loading, we recommend the use of the kickdown switch.

For details of the method of use, see "Kickdown switch (3-49)". This machine is equipped with an auto-shift system that auto- matically shifts the gear. For details of the method of use, see "Transmission shift mode selector switch (3-43)" and "Automatic shift (3-57)". When the machine is traveling at high speed, if the gear shift lever is shifted down to a lower speed, such as 4th 3rd or 4th 2nd, with the accelerator still depressed, the transmission is not shifted down. This is to prevent the engine from overrunning. In this case, the central warning lamp lights up and the alarm buzzer sounds.

At the same time, “E00“ is displayed on the top line of the character display and “OVERRUN PROTECT“ is dis- played on the bottom line. If the alarm buzzer sounds, release the accelerator pedal imme- diately and depress the brake pedal to reduce speed, then carry out the gearshift operation. WA470-6H – VEAM946100 3-117 WARNING WARNING