3.3 Operation Operation Changing direction ! When changing direction between FORWARD and REVERSE, check that the new direction of travel is safe. There is a blind spot behind the machine, so be particularly careful when changing direction to travel in reverse. ! Do not switch between FORWARD and REVERSE when traveling at high speed. When switching between FORWARD and REVERSE, depress the brake to reduce the travel speed sufficiently, then change the direction of travel. Max. speed for changing direction: 12 km/h. GK038080 1 There is no need to stop the machine even when switching between FORWARD and REVERSE. Place directional lever (1) in the desired position. a Position (a):
FORWARD N Position N: NEUTRAL b Position (b): REVERSE Check that the backup alarm sounds when the directional lever is set to REVERSE. If the backup alarm does not sound, please contact your KOMATSU distributor for repairs. GK043144 REMARK If the directional lever is operated slowly or is stopped midway between the forward and reverse directions, “E01 MAINTE- NANCE“ may be displayed on the character display. In this case, there is no failure, but try to operate the directional lever so that the change in direction is completed within 2 seconds.
If an attempt is made to switch the direction between FOR- WARD and REVERSE while traveling at high speed (when using 3rd or 4th), if the travel speed and engine speed are in ranges (A) or (B) in the chart, the central warning lamp will light up and the alarm buzzer will sound. At the same time, “E00“ is displayed on the top line of the char- acter display and “OVERRUN PROTECT“ is displayed on the bottom line. If the alarm buzzer sounds, depress the brake pedal immedi- ately to reduce speed, then operate the directional lever to switch between FORWARD and REVERSE. GK043169 (X): Travel speed (km/h) (Y):
Engine speed (rpm) 3-118 WA470-6H – VEAM946100 Cha gdirection WARNING ngin gdirection WARNING