3.3 Operation Operation Using switch to change between forward and reverse If the directional switch actuation switch is ON and the directional lever is operated to the FORWARD position (F) or REVERSE posi- tion (R), the direction of travel will change to FORWARD or REVERSE, regardless of the position of the directional switch at the side of the control levers on the machine. Priority is given to the operation of the directional lever, so be care- ful when operating. When this is done, the central warning lamp lights up and the alarm buzzer sounds. Set the directional lever and directional selector switch at the side of the work equipment control lever to the Neutral position (N) . 1.
Place the directional lever at the N position. F N R GK043144 2. Turn on directional selector switch actuation switch on the right side of switching panel that enables directional selec- tion. a Position (a): ON Position (b): OFF The two pilot lamps light up, i.e. one is the pilot lamp built in the actuating switch and another is the directional selector pilot lamp on the machine monitor. b GK038037 Then the actuating switch enables the forward - reverse shifting to function. 3-120 WA470-6H – VEAM946100 WARNING WARNING