Operation 3.3 Operation If the switch or the lever is in one of the following conditions, set it to the correct position. ! When directional lever is not at Neutral position (N) If the directional lever is not at the Neutral position (N), the pilot lamp flashes, and at the same time, the central warning lamp lights up and the alarm buzzer sounds. In this condition, the machine will move forward or in reverse according to the set position of the directional lever. Return the directional lever to the Neutral position (N). GK043170 !
When directional selector switch is at F or R when engine is started If the directional selector switch is at F or R, the central warning lamp lights up and the alarm buzzer sounds. In this condition, the engine will not start, so set the direc- tional selector switch to N. 3. Press the directional selector switch on the side of the work equipment control lever to the desired position. GK043139 WA470-6H – VEAM946100 3-121