Komatsu — Transmission cut-off function

Operation 3.3 Operation Transmission cut-off function When the transmission cut-off switch is turned ON, the pilot lamp lights up and the following transmission cut-off function is actuated. b Position (a): OFF Position (b): ON When the brake pedal is depressed, the brakes are actuated and the transmission is returned to Neutral when the brake pedal is depressed to the set position. a GK038024 REMARK For details of the method of adjusting the set position for the amount that the brake pedal is depressed, see "Adjusting trans- mission cut-off position (3-124)". To match the following type of work, adjust the set position to cut off the transmission at a smaller or larger angle. !

When carrying out scooping-up work, lower the brake pedal depression position for the cut-off (transmission shifted to neutral). In this setting, the transmission driving force is cut at a point where there is ample braking force, so this pre- vents the machine from slipping down. GK043172 ! When approaching dump trucks during loading operations, raise the brake pedal depression position for the cut-off (transmission shifted to neutral). In this setting, the fine con- trol of the braking immediately before dumping the load can be carried out with the brake only, so this makes it easy to control and allows the machine to be brought to a soft stop. WA470-6H – VEAM946100 3-123 GK03221