Komatsu — Transmission cut-off function

3.3 Operation Operation Adjusting transmission cut-off position Apply the parking brake before adjusting the transmission cut-off position. Adjust the amount that the brake pedal is depressed. 1. Start the engine with starting switch (1), then set parking brake switch (2) to the ON position. 2 2. Set transmission cut-off switch (3) to the ON position. 3. Depress brake pedal (4) and adjust the set position to return the transmission to Neutral. GK038080 1 4 4. Press transmission cut-off set switch (5), then release it. When the switch is released, the buzzer will sound with a repeated short sound, and the cut-off position is set. 3 5 Method of canceling cut-off position 5.

After the buzzer sounds in Step 4 of the adjustment proce- dure, the transmission cut-off switch flashes for 2 seconds. While it is flashing, press transmission cut-off set switch (5) again and release it. 6. The buzzer will sound with a long sound and the adjusted cut-off position is canceled. GK047020 Stopping when transmission cut-off is on When the transmission cut-off switch is ON, if the brake pedal is depressed, the transmission is returned to Neutral when the brake pedal is depressed to the set position. REMARK When the transmission cut-off switch is OFF, the transmission is not returned to Neutral. 3-124 WA470-6H – VEAM946100 WARNING WARNING