Operation 3.3 Operation REMARK To reduce fuel consumption, depress the accelerator pedal the minimum possible amount. If it is depressed fully, the fuel con- sumption will increase, but there will be no increase in the amount loaded. 3. When the material is in a stockpile, keep the cutting edge of the bucket horizontal; when loading blasted rock, have the bucket tilting slightly down. Be careful not to get blasted rock under the bucket. This will make the front tires come off the ground and slip. Try to keep the load in the center of the bucket; if the load is on one side of the bucket, the load will be unbalanced. ! Stock pile GK043176 ! Blasted rock GK043177 4.
At the same time as thrusting the bucket into the material, raise the lift arm to prevent the bucket from going in too far. By raising the lift arm, ample traction will be produced by the front tires. REMARK If the bucket is thrust too much and the lift arm stops rising or the machine stops moving forward, release the accelerator pedal a little. Proper operation of the accelerator pedal for each type of the soil is effective for saving of fuel and prevention of wear of the tires. GK043178 WA470-6H – VEAM946100 3-131