Komatsu — 3.7.2 Towing the machine

3.7 Troubleshooting Operation 3.7 Troubleshooting 3.7.1 When machine runs out of fuel When starting the engine again, check carefully that the area around the engine is safe before cranking the engine. When starting the engine after running out of fuel, fill with fuel and bleed the air from the fuel system before starting. For details of bleeding the air, see "Replace fuel main filter car- tridge (4-72)". 3.7.2 Towing the machine ! Serious injury or death could result if there is any mistake in the selection of wire rope or method of towing a disabled machine. ! Check that the wire rope is of ample strength for the weight of the machine being towed. !

Never use a wire rope which has cut strands (A), reduced diameter (B), or kinks (C). There is danger that the rope may break during the towing operation. ! Always wear leather gloves when handling wire rope. GK032072 ! Never tow a machine on a slope. ! During the towing operation, never stand between the tow- ing machine and the machine being towed. ! Move the machine slowly and be sure not to apply any sud- den load on the wire rope. ! If there is a failure in the brake line, the brakes cannot be used, so be extremely careful when towing. 3-162 WA470-6H – VEAM946100 WARNING WARNING WARNING WARNING