Operation 3.7 Troubleshooting When engine can be used ! If the transmission and steering wheel can be operated, and the engine is running, it is possible to tow the machine out of mud or to move it for a short distance to the edge of the road. ! The operator should sit on the machine being towed and operate the steering in the direction that the machine is towed. When engine cannot be used When towing a machine with the engine stopped, use the follow- ing procedure. 1. The transfer oil does not lubricate the system, so remove the front and rear drive shafts. If necessary, block the tires to prevent the machine from moving. 2. The steering cannot be operated, so remove the steering cylinder.
Even if the brakes are in good condition, the brakes can only be used a limited number of times. There is no change in the operating force for the brake pedal, but the braking force is reduced each time the pedal is depressed. 3. Connect the towing equipment securely. When carrying out towing operations, use two machines of at least the same class as the machine being towed. Connect one machine each to the front and rear of the machine being towed, then remove the blocks from the tires and tow the machine. 4. Parking brake The parking brake cannont be turned OFF. To release the parking brake, do as follows. WA470-6H – VEAM946100 3-165