3.7 Troubleshooting Operation ! When towing a machine downhill, use a larger machine for towing to provide ample rimpull and braking power, or con- nect another machine to the rear of the machine being towed. This way it is possible to prevent the machine from losing control and turning over. ! Towing may be carried out under various differing conditions, so it is impossible to determine beforehand the requirements for towing. Towing on flat horizontal roads will require the minimum rimpull, while towing on slopes or on uneven road surfaces will require the maximum rimpull. ! Connect a wire rope to the part indicated with the arrow in the diagram at right.
GK047024 3-164 WA470-6H – VEAM946100