4.9 Service procedure Maintenance When required 9. After the cooling fan reverse rotation pilot lamp on the machine monitor flashes, check that it goes out. The fan is set to rotate in the normal direction. 10. Run the engine at low idling for approx. 10 seconds. Auto reverse function (Option) GK043111 1. Run the engine at low idling. 2. Press position (a) (auto reverse rotation ON) of cooling fan reverse rotation switch (1). 3. Check that pilot lamp inside of the switch and the cooling fan reverse rotation pilot lamp on the machine monitor light up. The fan automatically rotates in reverse for 2 minutes every 2 hours.
a GK038036 REMARK When the fan direction is switched, the reverse rotation pilot lamp flashes. When the machine is operating under high load or in low tem- peratures, the direction of rotation of the fan may not change. This is to protect the machine. Run the engine at low idling and wait for the oil temperature or water temperature to go down before operating the switch. GK043111 WA470-6H – VEAM946100 4-45