4.9 Service procedure Every 250 hours service Maintenance Adjusting 1. Loosen bolts (1) and (2), loosen the locknut of bolt (3), then loosen bolt (3) and move compressor (4) to adjust. 2. Tighten bolts (1) and (2) and the locknut of bolt (3) to hold compressor (4) in position. 3 2 NOTE ! Check each pulley for damage, wear of the V-groove, and wear of the V-belt. In particular, be sure to check that the V- belt is not touching the bottom of the V-groove. 4 GK047044 1 ! In case any of the following occurs, ask the KOMATSU dis- tributor in your territory to replace the belts with new ones. The fan belt has elongated, leaving little allowance for adjustment. A cut or crack is found on the belt.
Slipping or creaking sound is heard coming from the belt. ! When the new V-belt is set, readjust it after one hour of oper- ation. 4-64 WA470-6H – VEAM946100