Komatsu — Check brake disc wear

4.9 Service procedure Maintenance Every 2000 hours service If the disc is near the wear limit, carry out inspection at shorter intervals, regardless of the specified inspection inter- val. 4. Install cap nut (1). Tightening torque: 29.4 to 39.2 Nm REMARK On new machines, the position of the guide is adjusted so that the end face of rod (2) comes to the end face of guide (3). For this reason, do not loosen locknut (4) except when replacing the disc. Carry out the operation with two workers: one worker depresses the brake pedal and the other worker pushes in rod (2). WA470-6H – VEAM946100 4-83