Attachments, Options 6.4 Joystick steering system 6.4.2 Structure and function The joystick steering system is a system used to steer wheel loaders with a lever instead of a steering wheel. The joystick enables steering with small, light movements, and helps to reduce operator fatigue. When joystick ON/OFF switch (1) is turned ON, it becomes pos- sible to operate the steering with the joystick. 1 GK043189 When the joystick steering is in use, the joystick pilot lamp on the machine monitor lights up. On machines equipped with the joystick steering system, it is possible to use joystick ON/OFF switch (1) to select the steering and transmission operation method as shown in the table below.
In addition, on machines equipped with joystick steering, the transmission auto shift function is also included. The differences between operation using the joystick and opera- tion using the steering wheel are as follows. GK043190 *: Does not shift up above speed range of gearshift lever.
WA470-6H – VEAM946100 6-13 Selection Operation using joystick Operation using steering wheel Joystick ON/OFF switch ON OFF Steering Steering using joystick (steering with steering wheel is also possible) Steering using steering wheel Trans- mission F/N/R Operation using FNR switch at top of joystick Operation using transmission direc- tional lever Transmission type Auto Auto Shift mode selector switch Manual Auto (L, M, H) Manual Auto (L, M, H) Selection of speed range Speed range selection using shift up, shift down switches at top of joystick* Automatic gear- shifting according to travel speed Operation using gearshift lever Automatic gear- shifting according to travel speed