6.4 Joystick steering system Attachments, Options Operation using joystick lever and operation using steering wheel ! If the directional lever and joystick FNR switch are not at the neutral position, the neutral interlock circuit makes it impos- sible to switch the transmission directional control (when the joystick ON/OFF switch is ON, it is switched from the direc- tional lever to the joystick FNR switch; when the joystick ON/ OFF switch is OFF, it is switched from the joystick FNR switch to the directional lever). ! Do not use the joystick when traveling on public roads. Select joystick operation or steering wheel operation according to the work.
Steering using joystick This is suited for continuous loading operations on jobsites with ample space where the loading operation can be carried out with a comparatively relaxed cycle time. Because operations can be carried out with a small movements and light operating effort, this is also suitable for reducing opera- tor fatigue when operating continuously. Steering using steering wheel This provides excellent fine control and ability to travel straight, so it is suitable for travel between jobsites and for load and carry operations.
In addition, it is also suitable for short cycle loading operations because the upper part of the operator's body is sup- ported by the steering wheel when frequently switching between FORWARD and REVERSE. 6-14 WA470-6H – VEAM946100 CAUTION CAUTION