Safety 2.4 Precautions for maintenance Maintenance with engine running ! Stop the machine on firm, level ground. ! Select a place where there is no hazard of falling rocks or landslides, or of flooding if the land is low. ! Lower the work equipment completely to the ground and stop the engine. GK032073 ! After stopping the engine, turn the starting switch to the ON position, operate work equipment control lever (1) fully in the RAISE and LOWER directions 2 - 3 times to release the remaining pressure in the hydraulic circuit, then set work equipment lock lever (2) to the LOCK position.
1 After releasing the remaining pressure in the hydraulic cir- cuit, turn the starting switch to the OFF position. Check that the battery relay is off and main power is not con- ducted. Wait for approx. one minute after turning off the engine starting switch key and press the horn switch. If the horn does not sound, it is not activated. GK038014 Free Lock GK038007 2 ! Set parking brake switch (3) to the ON position, then put blocks under the front and the rear of the tires. GK050018 WA470-6H – VEAM946100 2-35 OFF ON 3 GK038008