2.4 Precautions for maintenance Safety ! Lock the front and rear frames with safety bar (4). 4 Free Lock GK047005 Two workers for maintenance when engine is running To prevent injury, do not carry out maintenance with the engine running. If maintenance must be carried out with the engine run- ning, carry out the operation with at least two workers and do as follows. ! One worker must always sit in the operator's seat and be ready to stop the engine at any time. All workers must main- tain contact with the other workers. ! When carrying out operations near the fan, fan belt, or other rotating parts, there is a hazard of being caught in the parts, so be careful not to come close. !
Never drop or insert tools or other objects into the fan or fan belt. Parts may break or be sent flying. GK032076 ! Set work equipment lock lever (1) to the LOCK position to prevent the work equipment from moving. Then set parking brake switch (2) to the ON position to prevent the machine from moving. Free ! Do not touch any control levers. If any control lever must be operated, give a signal to the other workers to warn them to move to a safe place. Lock GK038007 1 2-36 WA470-6H – VEAM946100 OF F ON 2 GK038008