Komatsu — 2.4 Precautions for maintenance

2.4 Precautions for maintenance Safety Personnel Only authorized personnel can service and repair the machine. Do not allow unauthorized personnel into the area. If necessary, employ an observer. Attachments ! Appoint a leader before starting removal or installation oper- ations for attachments. ! Place attachments that have been removed from the machine in a stable condition so that they do not fall. And take steps to prevent unauthorized persons from entering the storage area. GK032079 Working under the raised boom Danger of injury! The raised boom may suddenly fall! For safety reasons, a raised boom must be secured against dropping before you pass or stand under it. !

The boom must be secured against moving if any work is to be carried out under it when it is in a raised position. For this purpose you should use a supporting prop (1) which is to be positioned below the boom. 1 ! Park the machine on level, solid ground. ! Apply the parking brake. ! Place wheel chocks in front of the wheels to prevent the machine from inadvertently rolling away. GK032080 ! Lift the arm far enough to allow the supporting prop to be placed beneath the boom. ! Switch off the engine. Free ! With the engine switched off, lower the boom slowly until it rests on the supporting prop. ! Set the control lever to "NEUTRAL" and secure it with the work equipment lock lever (2) (locked).

Lock GK038007 2 2-38 WA470-6H – VEAM946100 WARNING WARNING