Safety 2.4 Precautions for maintenance Precautions when using hammer When using a hammer, pins may fly out or metal particles may be scattered. This may lead to serious injury. Always do as fol- lows. ! If hard metal parts such as pins, bucket teeth, cutting edges, or bearings are hit with a hammer, there is a hazard that pieces might be scattered and cause injury. Always wear safety goggles and gloves. ! When hitting pins or bucket teeth, there is a hazard that bro- ken pieces might be sent flying and injure people in the sur- rounding area. Always check that there is no one in the surrounding area. GK032081 !
There is a hazard that the pin hit with strong force may fly out and injure people in the surrounding area. Repair welding Welding operations must always be carried out by a qualified welder and in a place equipped with proper equipment. There is a hazard of gas, fire, or electrocution when carrying out welding, so never allow any unqualified personnel to carry out welding. Removing battery terminal When repairing the electrical system or when carrying out elec- trical welding, remove the negative (-) terminal of the battery to prevent the flow of current. WA470-6H – VEAM946100 2-39