mercedes-benz — Mercedes-Benz of North America, Inc. Service Manual 1993

20 Tighten conrod bolts to an initial torque of 30 Nm and angle of rotation torque of 90”. Caution! Remove oil pump, clean, replace, if necessary, oil pump gears and drive sleeve (18-210). Remove oil pressure relief valve and check ease of movement of pistons (18-215). Remove oil filter (18-l lo), disassemble and clean. Install initial operation oil filter element. After 1000 - 1500 km, change engine oil and oil filter element. 03.0905 - 320114