2 Check whether the sealing lip of the radial seal has worn at the spacer ring (7) (groove). If necessary, remove spacer ring with the puller 102 589 00 33 00. If necessary, install new spacer ring. 3 Oil the sealing lip of radial seal (45). Caution! Do not use any grease. Grease prevents the inclined webs on the sealing lip from positioning. 4 Pull in radial seal with an installation tool. Installation instruction Use special tool 102 589 00 14 00 on engines with single roller chain, use additionally the ‘spacer ring 102 589 01 14 00 (01) on engines with double roller chain. 03.0905 - 324el