mercedes-benz — Mercedes-Benz of North America, Inc. Service Manual 1993

Turn the pressure pad (06) by hand to the right sufficiently until it contacts the washer (57, previous picture), and a clearly detectable pressure point is reached. Note The pressure pad must contact the washer and not the rocker arm. 3 Insert measuring pin adapter (04) in the central bore of the pressure pad (06), set dial gauge measuring pin on the measuring pin adapter with 5 mm pretension (small pointer) and attach the dial gauge to claw sleeve bracket (arrow). Position large dial gauge pointer on zero by turning the dial gauge scale. 4 Turn pressure pad (06) slowly to the right with a fork wrench (17 mm) on the hexagon until a clearly detectable pressure point is reached.

Read off setting range (residual stroke) on dial gauge. It must be 0.5 rnolp. In event of smaller or larger residual stroke, correct installation position of the hydraulic valve clearance compensating element. - 2.4 05 0906 - 214/7