mercedes-benz — Mercedes-Benz of North America, Inc. Service Manual 1993

7 Turn crankshaft in direction of rotation of the engine until dial gauge small pointer has returned by 2 mm (valve stroke). In this t?~ value on the vibration damper must agree positic? Nrth the value “intake valve opens after TDC” in the valve timing table. Adjustment Woodruff keys are available in the following stages: If valve timing settings have to be corrected, an offset Woodruff key has to be installed, and a Offset mm Part No. for a correction of approx. new timing chain when chain length is excessive.

0.9 0.7 6 ” C K A 67 CKA 1.1 621 991 01 67 9.5” CKA 1.3 621 991 00 67 11.5” 621 621 991 04 67 991 02 CKA CKA = CranK Angle An offset of one tooth on the camshaft timing gear produces approx. 20 at the crankshaft. Offsetting the Woodruff keys to the right (in direction of travel A) causes the valves to open earlier and an offset to the left (6) causes the valves to open later. P05-0161-13 8 Position engine on ignition TDC of No. 1 cylinder. 05.0906 - 215 5