mercedes-benz — Mercedes-Benz of North America, Inc. Service Manual 1993

To do this hold in position with a fork wrench (24 mm) on flats at the rear end of the camshaft. Note On vehicles with self-levelling suspension the camshaft timing gear and driving sleeve are attached by a bolt with hexagon recessed hole. Take out the driving sleeve. 13 Remove camshaft timing gear. 14 Place cleaning rag over the timing case and remove Woodruff key (6). 15 Insert selected Woodruff key. 16 Put on camshaft timing gear. In the process note that the colour markings on the camshaft timing gear and the timing chain align. Do not torque the set bolt (9) yet. 17 Repeat test Numbers 6 and 7. 18 Torque camshaft timing gear set bolt (9) to 80 Nm.

For this hold in position with a fork wrench (24mm) on flats at the rear of the camshaft. PO5-2025-13 05.0906 - 21517