(41), bolt in screw plug (40) and tighten to 70 Nm. (39), replace sealing ring 19 Insert compression spring 20 Unbolt rocker arm bearing support from No.1 cylinder and withdraw rocker arm (51a) for hydraulic valve clearance compensation. 21 Install rocker arm bearing support, tightening torque 20 Nm (05- 235). PO5- 2021-13 22 Remove dial gauge and dial gauge bracket. 23 The remaining installation takes place in the reverse sequence. 24 Check for leaks when engine is running. 05 0906 - 21518