Camshaft . . . . . . . . . . . . . . . . . . . . . . . . . . . . turn and check for smooth running, possibly fit new bearing support (Number 8). Bearing support (61) . . . . . . . . . . . . . . . . . . remove, complete with rocker arm (51) and install rocker shaft (50) and bearing support (Numbers 9 and lo), 20 Nm. Special tools 7 . Threaded pm M8, 116589203300 001 589 66 21 00 116 589 20 33 00 Data Rocker arm bore 18.016 18.027 __ Rocker shaft diameter 17.089 Radial clearance between rocker arm and rocker shaft 0.016 0.038 =TKEB- Rocker arm bearing support bore i‘8-01 i 8.000 Note Only one bearing support can be replaced on an engine, otherwise camshaft binding will result. 05.0906 - 2402