mercedes-benz — Mercedes-Benz of North America, Inc. Service Manual 1993

4 Bolt up, unbolt support for lever compressor, 5 Connect cylinder leakage tester and pres- sur ,ize cylinder. 6 Mount lever compressor on the support and install the valve spring retainer. 7 Compress valve spring and take out valve cone halves with the magnetic lever. Caution! Do not remove the valve springs without compressed air in the cylinder, otherwise damage can occur due to contact between the valves and the piston. 8 Remove, install valve spring retainers and valve spring. (05260) and valve spring retainers, replace as necessary. 9 Check valve spring 10 Installation is the reverse of removal. 050906 - 250,6