John Deere Radial Piston Pumps (3000 Series) — John Deere Radial Piston Pumps (3000 Series) User Manual

AW1 ;R39499 R70;070300 965 290188 AW1 ;R39945 R70;070300 969 150589 CTM-7 (5-89) 2Rl ; 015 1S 110589 3000 Series (HPR)-Hydraulic Pump Litho in U.S.A. 15-15 DISASSEMBLE AND INSPECT PUMP SHAFT 1. Visually inspect taper bearing cones (A) for damaged cage·or rollers. 2. Visually inspect fixed spacers (8) and thrust washers (0) for wear or damage. 3. Inspect race (C) for nicks, scratches, pitting or metal discoloration. Replace race and pistons if external damage exists. 4. Hold pump shaft and slowly turn race (C). If assembly is sticking or noisy, replace ALL needle rollers between race and pump journal. A-Bearing Cones B-Flxed Spacers C-Race D- Thrust Washers IMPORTANT:

Be careful not to scratch or damage machined shaft surface (A). This could cause seal leakage. 5. Remove sealing ring(s) from shaft using an O-ring Seal Tool Set. NOTE: Single bank pump shaft is shown. AllTractorManuals.com