AW1;R39511 R70;070300 980 090288 AW1;R39598 R70;070300 987 090288 AW1;R39494 R70;070300 961 150589 CTM-7 (5-89) 2R3; 015 24 110589 3000 Series (HPR)-Hydraulic Pump IMPORTANT: Removed inlet valves must be replaced with new valves, since press fit is critical for sealing. Litho in U.S.A. 15-24 3. Install new inlet valve assemblies using a socket. Drive valves into pump housing until they are flush with housing surface. NOTE' Non-unitized design single bank pump is shown. Packing designs are different for non-unitized versus unitized pumps. Double bank pump has special packings on both sides of inlet housing. 2. Remove inlet housing from pump housing.
Save shims (8) on single bank pumps for reassembly. REMOVE AND INSTALL INLET HOUSING 1. Remove secondary housing on double bank pump. 3. Discard special packings (A) and O-ring (C). 2. Remove inlet valves and discard. AllTractorManuals.com